« Back to Automotive News

Brake Pads Ceramic vs Semi-Metallic

Replacing Brake Pads Your car’s braking system is made up of many different components, such as the brake pads. The pads are what clamp down onto the brake rotors to slow down and stop your vehicle when driving around Harrisburg, Mechanicsburg, or Trevose.

Due to their importance, they need to be replaced when necessary. What type of brake pads would be best for your automobile?

We here at Faulkner Auto Group will help answer that question is this guide to ceramic vs. semi-metallic brake pads. Discover the benefits of each brake pad type and contact us if you have any questions.

What Are Ceramic Brake Pads?

Ceramic Brake Pads

Ceramic brake pads have been around since the 1980s and are newer compared to semi-metallic. In fact, they were developed as an alternative to semi-metallic or even organic brake pads.

They’re comprised of a dense ceramic material with embedded copper fibers. The fibers are molded into the ceramic compound to give a strong and long-lasting brake pad.

They may be the most expensive brake pad type, but they also last the longest. That’s because their design can easily absorb heat that comes from continuous or hard, violent braking.

Other benefits of having ceramic brake pads include:

  • Less noise
  • Creating little amounts of dust
  • Providing faster recovery after a stop

All About Semi-Metallic Brake Pads

Semi-metallic brake pads, meanwhile, have been around much longer than ceramic ones. They’re made from 30% to 65% metal, specifically steel wool, wire, or copper. They also consist of friction modifiers and fillers, along with graphite lubricant, to give you the most versatile brake pads around.

They’re a bit noisier and produce more brake dust than ceramic pads. However, they have lots of advantages, such as:

  • Increased braking performance
  • Easier on brake rotors
  • Have a higher thermal threshold from the metallic content
  • Have a wider operating range when it comes to temperature

When to Replace the Brake Pads

Brakes Making Loud SoundsNo matter which brake pad type you opt for, they’ll need to be replaced at some point. They usually last between 30,000 and 35,000 miles. Of course, this can vary based on environment and driving style.

Even if you’re not sure when the brake pads should be replaced, there are several warning signs that you can look out for.

For instance, you may at some point hear a grinding or growling metallic sound. It’s at this point that the brake pads have worn down completely. The noise you’re hearing is the brake rotor and caliper rubbing against each other. If you don’t get the brake pads replaced soon, then you may need to replace the rotors, too, which could get costly.

Contact Our Service Center for More Brake Pad Info

If you have any questions about ceramic or semi-metallic brake pads, just contact us at Faulkner Auto Group. Our service technicians will help outfit your vehicle with the ideal brake pad type to help keep it running well for many years and miles.

We’ll also perform brake repairs or replacements as needed at any of our service centers near Harrisburg, Mechanicsburg, or Trevose.

Don’t wait. Contact us today!

Need Help?